Roadtrek 170 Chevrolet, Owner'S Manual, Page: 28 / 92

Daily living
Doc No: 21906503 Rev: 05 Copyright© Roadtrek Motorhomes Inc. 2007 B - 12
POWERED SOFA:
The powered sofa is operated using a bi-directional switch
located on the side of the cabinet in the rear of the unit
( Picture B-P26d ). By depressing the top of the switch, the
sofa will be lowered. By depressing the bottom of the switch,
the sofa will be raised. This circuit is protected by an
automatically resetting 30 Amp. breaker located in the
electrical compartment near the inverter.
The setup of the bed is very simple for this item and is best
explained by the pictures below.
Versatile Units:
1. Lower the sofa into place.
2. Place the bed support located at the side of
the rear passenger side cabinet (picture B-P4)
into the opening.
3. Place the back rest cushions from both side Ottoman
seats together on the support (Picture B-P26c).
Popular Units:
1. Lower the sofa into place.
2. The dinette table located at the rear of the galley,
under the driver side Ottoman cushion, is used for the
bed support (Picture B-P26c).
3. The passenger side Ottoman seat bottom cushion is
moved onto this support, and the driver side backrest
is opened out to fill the space against the passenger
side wall.
Picture B-P26b: Powered Sofa in fully reclined
position.
Picture B-P26a: Powered Sofa in upright position.
Picture B-P26c: Powered Sofa in bed
configuration.
Picture B-P26d: Sofa
Switch
Picture B-P26e:
Location of dining
table in Versatile