Roadstar RCR-777UD+, User Manual

Page: 7 / 42

4 English
1. Select your favourite station as explained before;
2. Press
[AMS/MODE] button (11). “Preset Store” will appear on display;
3. Press [SKIP -/+] (5/6) to select the preset number;
4. Press [ENTER] (3) to confirm.
To recall a preset station press repeatedly the [PRESET] button (9).
FM RADIO OPERATION
1. Select “FM” mode by pressing the [FUNCTION
]
button (2);
2. Adjust radio frequency to your desired station as follows:
MANUAL SCAN: Use the [SKIP -/+] buttons (5/6) to fine tune your desired station in
a step of 0.05 MHz or press and hold the [SKIP -/+] buttons (5/6) to scan the next/
previous available station.
AUTO SCAN: Press & Hold [AMS] button (11) to start automatic scan.
PRESET
The PROGRAMMING operation is the same as that of DAB Preset.
Note: For a better reception, reorient the antenna (13).
TAPE OPERATION
1. Select “TAPE” mode by pressing the [FUNCTION
]
button (2);
2. Press [STOP/EJECT] (15.2) to open the cassette door (12) and insert your tape;
3. Close the cassette door (12);
4. Press [PLAY] (15.5) to start playing tape.
 Press PAUSE (15.1) when you want to stop playing tape operation temporarily,
press again to resume tape operation.
 Press STOP/EJECT (15.2) when finished, press again to open the cassette door.

Press F.FWD (15.3) or RWD (15.4) to start rapid tape winding either forward or re-
verse direction.
CD-MP3 OPERATION
1. Select “CD” mode by pressing the [FUNCTION
]
button (2);
2. Open the CD door (14) and place a CD-MP3 disc with the label up in the CD com-
partment.
3. Close the CD door (14). Focus search is performed and playback will start auto-
matically from the first track.
PROGRAMMING
Up to 20 tracks can be programmed for disc play in any order.
1. Stop the playback by pressing [STOP] (4);
2. Press [AMS/MODE] (11), the display (1) will show “P01” and flash;
3. Select desired track by using [SKIP -/+] buttons (5/6);
4. Press [AMS/MODE] (11) again to confirm desired track into the program
memory;
5. Repeat step 3 and 4 to enter additional tracks into the program memory;
6. When all the desired tracks have been programmed, press [PLAY] (3) to play the
disc in the order you have programmed;