POWERSUPPLY
Use with regular batteries
Open the battery compartment door, located on the bottom of the unit, by sliding the door
and lift it up. (Do not remove the battery door). .
2.
Insert 2 x
size alkaline batteries, following the correct polarity, as indicated
on the unit.
3.
Close the battery compartment door.
Note:
If the symbol
flashes in the display, batteries are weak and ought to be
replaced.
Use with AC/DC
1.
Insert the DC plug, at the end of the AC/DC adaptor cord, into the DC
V INPUT socket
located on the back of the unit.
2.
Connect the AC/DC adaptor into a 230V
AC power outlet.
Notes:
.
If the AC adaptor is connected when regular batteries are installed, the power supply
automatically switches to the AC power source.
.
Use only the supplied AC/DC adaptor. Using other types of adaptor may damage the unit.
.
Make sure that the AC/DC adaptor matches with your household voltage before connect-
ing it into the wall outlet.
.
When not using AC power, disconnect the
adaptor from the wall outlet.
.
Do not touch the AC/DC adaptor with wet hands.
Use rechargeable batteries
1.
Disconnect the AC/DC adaptor from the wall outlet if it is being connected to the unit.
2.
Open the battery compartment door as mentioned previously.
3. Insert 2 recommended rechargeable batteries
following the correct
polarity as indicated on the unit.
4.
Close the battery compartment door.
5.
Move the CHARGE SWITCH (10) to ON to start recharging function. The red CHARGE
indicator will light indicating that the rechargeable batteries are being charged.
6.
After 15 hours of charging unplug the AC/DC adaptor from the wall outlet.
Summary of Contents for PCD-9700
Page 3: ...PCD 9700 12 14 5 16 15 ...
