English
English
SPECIFICATIONS
CD/MP3 PLAYER SECTION
Signal to Noise Ratio
> 70dB
Channel Separation
> 50 dB (1kHz)
Frequency Response
20Hz - 20 kHz
TUNER
Sensitivity
2 dB
μ
Stereo separation
35 dB
Signal to noise radio
55 dB
FM Frequency range
87.5-108 MHz
MW Frequency Range:
522 - 1620 KHz
Channel step FM:
50 kHz
Channel step MW:
9 kHz
Intermediate frequency
10.7 MHz
LINE-OUT
Output
350mV max.
Impedance
10kOhm
GENERAL
Power Supply
13.8V DC
(10.8-15.6V allowable)
Speaker impedance
4 or 8 ohm
Output power
7 W (RMS) x 4CH
Note:
Specifications and the design are subject to possible modification without notice due
to improvement.
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
This marking shown on the product or its literature, indicates that it should
not be disposed with other household wastes at the end of its working
life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of
wastes and recycle it responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased
this product, or their local government office, for details of where and how
they can take this item for environmentally safe recycling. Business users
should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other
commercial wastes for disposal.
HOW TO USE BLUETOOTH IN YOUR CAR AUDIO
How to Perform Pairing:
Before you can dial out from the car stereo, you must first perform PAIRING. Pairing is a
procedure used to connect 2 Bluetooth devices together.
1. This unit’s Bluetooth function is always on, perform the pairing starting from your
cellular phone. Refer to your cellular manual on proper pairing.
2. Perform the search for available Bluetooth devices, “CAR--BT ” will show. Enter ‘0000’
when asking for code.
3. After successful pairing (BT-ON appear in the display), connect to the head unit if it is
not automatically connected.
How to make / receive calls using front panel
• Press the MODE button until “PHONE” is displayed then dial the phone number using
your phone to dial the desired number.
2. Press “ ” (23) to dial out.
• During conversation, press “BD/CL” button to end call.
• When there is incoming call, press “ ” (23) button to receive call.
• Press “BD/CL” button to reject incoming call.
Audio Streaming
(A2DP)
1. If your phone is “A2DP” format compatible, you can play music in your mobile and the
music will be transferred to car audio unit.
2. Make sure your mobile and the car radio unit is paired and connected.
3. Play the music in your mobile according to your mobile operating method.
4. You can press
>>
or
<<
on head unit for previous or next tracks.
13
14
