CD240MPR/512
15
Basic Functions
Power on/off
Press
PWR
button on the front panel to turn the unit ON.
Press the
PWR
button to turn the unit OFF.
Selecting the sound source
Each press of the
MODE
button will select Tuner, CD/MP3, NAND
Removable MP3 player) or AUX. The button toggles between these
sources.
Volume
Press the
VOL +
button to increase the volume
Press the
VOL -
button to reduce the volume.
The display will show the current level.
Sound adjustment
Briefly press the
SEL
button. Each press of this button will step through
the available audio functions in the following order to be set as required:
-> VOL (volume) -> BAS (bass) -> TRE (treble) -> BAL (balance L&R)
-> Fad (fade front to rear speakers) ->
Use the
VOL +/-
button to adjust the function.
The display will show the current level.
NOTE:
Switching the unit on after a RESET, or when the power to
the unit was disconnected, the unit will revert to the factory default
settings
NOTE:
Each time a button is pressed a beep tone is sounded, this
is the default option. To turn the beep off (BEEP OFF) see page
19.
