RoadScan Canada PBC10, User Instruction Manual

Page: 14 / 25

object (a paper clip or similar) to push this button. The camera will then be reset. No files are
lost as files can only be deleted off a computer.
DASH CAM
The PBC10 can be used as a dash cam in your vehicle making it the most versatile camera in
the industry .
To attach the PBC10 docking station to your vehicle, locate the best suitable spot on the
dashboard to allow for best viewing position, clean the area of the dashboard to ensure
proper adhesion. For best adhesion, utilize 3M Dual Lock as it will provide the proper
securement required to ensure that your video is stabilized (velcro will not work).
Suggested: place both pieces of Dual Lock on the bottom of the charging base, then place the
charging base onto the dashboard. This will ensure that both pieces of Dual Lock are aligned
properly. Ensure that the PBC10 is aligned properly prior to pressing the Dual Lock onto the
dashboard firmly (with the USB port facing rearward).
Figure 12
Page 12
DASH CAM
Use the 12 volt adaptor (supplied), plug the USB into the USB port (DO NOT FORCE INTO
PLACE). Run the 12 volt adaptor cord to the 12 volt port in the vehicle. 12 volt ports are
located in different locations in vehicles and location should be referred to in the owner’s
manual for each vehicle. The 12 volt adaptor does have a 10 foot cord to allow the cord to be
run or hidden to the vehicle’s respective port. Please check with your vehicles manual for
reference to this option. RoadScan Canada Inc accepts no liability for any damage caused to
vehicles during this process of ‘running’ or hiding the 12 volt adaptor cord.