MT-009
User manual
8
negative pole of the power supply; when installing, please choose separate grounding or lap iron, do not
connect with other ground wires;
2. The orange line of the equipment is the ACC line, be sure to connect the ACC switch of the vehicle, the
terminal will judge whether to enter the fortification according to the ACC state; if the ACC line is not
connected, the vehicle will enter the default fortification state, the vibration will occur in the operation of
the vehicle, and the vibration alarm will be triggered. If the anti-theft function is not required, the ACC line
can be directly connected with the power positive pole;
3. Oil cut off electronic control line (yellow line) connected to the relay on the yellow line.
3.2 Precautions
3.2.1 Meaning of the indicator
Yellow light - GSM indicator
Status of the lights
meaning
Flash 1 time within 2 seconds
GSM initialization
Always bright
GSM communication is normal
not bright
GSM sleep/shutdown
Blue light - GPS indicator
Status of the lights
meaning
Flash 1 time within 2 seconds
Searching for satellite signals
Always bright
GPS/BDS is located
not bright
GPS/BDS sleep
Working logic
After the equipment is installed, when the yellow and blue lights are always on, the equipment e
nters the normal working state.
Static flame out state: ACC is off, and the device has a data every 5 minutes.
Sports ignition status: ACC is on, and the device has a data every 10 seconds.
Power failure alarm: After the device is connected to the power supply, the device will judge that
the power supply is connected. When the device is disconnected from the power supply within 3
seconds, the device triggers a power failure alarm and uploads it to the server.
Overspeed alarm: Set the overspeed alarm threshold. When the device speed exceeds the set value,
the device will alarm and upload to the server.
3.2.2 installation instructions
The installation mode of terminal is suggested to be concealed installation. The hidden installation of
terminal equipment should be installed by the professional agency designated by the dealer, and pay
attention to the following matters:
a. in order to avoid thieves damage, equipment selection should be concealed as far as possible;
b. avoids putting together with emission sources, such as reversing radar, burglar alarm and other vehicle
mounted communication equipment;
c. can be fixed with tie tape or with double adhesive with wide sponge;
