6 P100i GPS
playing, bright back light) will consume a large power, which will reduce the using
hour.
Ǐ
Note
ǐ
This machine adopts built-in, unchangeable Li-Ion battery. In order to avoid
fire and burning, please do not poke, bump or take it apart or throw it into fire or
water.
3.1.2 Use the home charger to supply power (Optional)
When the GPS navigator is first used, please use the AC adaptor to charge it.
1. Connect the DC part of the adaptor with the power interface at the left side of the
unit (The power interface is same as USB interface )
˗
2. The other part connect to the power socket, it supplies power while charging.
Ǐ
Remark
ǐ
Red LED indicates it’s being charged. Please wait until it is fully charged and don’t
pull out the adaptor while charging. When it is fully-charged, the LED will turn to Blue. If low
battery or no battery, please charge it immediately.
3.1.2 Use the car charger to supply power
1.
Connect the DC part of the adaptor with the power interface
˗
2. The other part connect to the power socket, it supplies power while charging.
Ǐ
Note
ǐ
Please insert the car adaptor after running the car so as not to damage the
machine by electricity collision.
3.2 Power on/off
Power on/off is controlled.
3.2.1 Power on:
Please check
˖
The battery is enough, or it is connected to external power source;
Please press the button on the top of the unit to boot.
Summary of Contents for P100i
Page 1: ......
