Roadmate HD500i, User Manual, Page: 9 / 64

Operation Instruction HD500i GPS
3
succeeding use.
1.1.3 Charging by Car Charger
Plug one terminal of the car charger into the USB port on the left side of the
GPS navigator and the other to the charging port to supply power and charge
the GPS navigator.
[Note] Plug in the car charger after the automobile is started to avoid
damage due to current surge.
1.2 Basic Use
1.2.1 Power on/off & Sleep
2.2.1.1 Power on
Press the power key on the top side of the GPS navigator for at least two
seconds to power it on.
[Note] Great humidity fluctuation may lead to short circuit of the GPS
navigator. Power on the navigator after it has accommodated to new
environment.
2.2.1.2. Power off & Sleep
Long press the power key to power off the GPS navigator. The following
interface will be prompted. If is selected, the navigator will
automatically resume the state before entering sleep mode when powered on
again.