Press the
“Test”
button.
Figure 2
4.
Release the “Dim” button. The LCD text display will
read “Learning ICX #1 — Advance? OK
.”
If you are installing a replacement motorhome monitor
or a replacement ICX transmitter into the towed vehicle,
press the button with the right-hand arrow (>) on the mo-
torhome monitor. The LCD text display will read “Press
Even Brake Test Button.”
(If you are programming the monitor for a second
towed vehicle, press the button with the left-hand arrow
(<) on the monitor to scroll to the next message — “Learn-
ing ICX #2 — Advance? OK
.” If you are programming
the monitor for a third or fourth towed vehicle, continue to press the button with the left-hand arrow (<) on the mo-
torhome monitor to scroll to the appropriate message in this series — “Learning ICX #3…” or “Learning ICX #4…”)
5.
Press the green “Test” button (Figure 2) on the Even Brake touch pad control panel. Even Brake will begin a self-
diagnostic test.
(As part of the test, Even Brake will cycle the brake pedal clamp up and down three times. When the brake pedal
clamp is depressed, the LCD display at the motor-home monitor will read “Braking.”)
6.
After Even Brake has completed the self-diagnostic test, the test light on the touch pad control panel will illuminate
green to indicate the system is ready, or red to indicate the system is not ready.
• If the test light is green and the LCD display reads “Test Is Good — System Ready,” the motorhome monitor is
programmed to the ICX transmitter. When the vehicle is towed, the monitor will display braking activity and system
status information from Even Brake.
The monitor can be programmed in this manner for up to four vehicles. Once programmed, the monitor will auto-
matically recognize the ICX transmitter in each vehicle without further adjustment.
• If the test light is red, check the motorhome monitor LCD text display for detailed information. You can also refer
to the “Communications” sections (“Overview” and “Reference Chart”) in the Even Brake owner’s manual.
7.
Before towing, read the Even Brake installation instructions and owner’s manual. Understand how to install and
operate Even Brake, and carefully follow the instructions and safety precautions.
Read all instructions before installing or operating Even Brake. Failure to understand how to install or
operate Even Brake could result in property damage, personal injury or even death.
Program the motorhome monitor
continued from preceding page
