KIT# 917-3
04/21/08
KS
All illustrations and specifications contained herein are based on the latest information available at the time of publication approval.
ROADMASTER, INC. reserves the right to make changes at any time without notice in material, specification and models or to discontinue models.
Fig.U
5. Pull the fender liner back to access a plastic fastener in each fender
fascia joint (Fig.M).
6. Disconnect the driving lights (Fig.N) then pull the sides of the fascia
out and forward to remove (Fig.O). Then, remove the energy absorption
foam (Fig.P).
7. Remove the fascia retainer brackets under each headlight by remov-
ing five 10mm (head) bolts and one plastic fastener per bracket
(Fig.Q,R).
8. Now remove the bumper core (four bolts per side) (Fig.S,T).
9. Remove the lower shoulder bolts located below the frame (Fig.U).
10. Insert both frame rail braces into the ends of the frame (Fig.V).
Fig.M
Fig.N
Fig.P
Fig.Q
Fig.O
Fig.R
Fig.U
Fig.T
Fig.S
Fig.V
BASEPLATE KIT
INSTALLATION INSTRUCTIONS
ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 1-800-669-9690 fax 360-735-9300 www.roadmasterinc.com
