Road Rover C7005BR Installing Manual Download Page 7

                 

Installing Guide of Opel Insignia 

       

 

 

 

7

       

 

49. Installation done                        50. Test every functions 

 

Install GPS Antenna

 

GPS antenna may be installed inside the car such as on the dashboard or coat rack; it may be also installed outside 

the bar such as the top of car or on the trunk lid. 

GPS antenna must have an open “visual field” towards the sky. If the glass of the car window is equipped with 

explosion-proof film or heat insulation film, it might greatly reduce the receiving strength; in that case it’s advised 

to install the GPS antenna outside the car. 

Precautions

 

z

 

Only the professional installing technicians are allowed to install and maintain this product. 

z

 

Installation or maintenance by the laypeople might cause electric shock or other risks and even damage the 

unit. 

z

 

In the process of connecting connector, pay attention to the hook position, don’t pull wires forcibly to avoid 

invalid connection; 

z

 

Please use the attached wire of the system, otherwise the accident of fire or smoke or damage to the unit or 

vehicle might be caused; 

z

 

Don’t cut off any extra wire which is kept for future use. Protect the ends of wire with insulating tape; 

z

 

In order to avoid short circuit, please disconnect the anode of the power accumulator before    any connection 

and installation; 

z

 

Ensure all lines are placed and protected in good condition, don’t let them interfere in any moveable parts of 

the car such as steering wheel, gearlever, brake pedal, sliding chair, door or other parts; 

z

 

The voice is input through AUX, so please ensure audio cable connectes well with the AUX port of the 

original car audio system 

z

 

This Teana GPS can be fit for new Teana 2.0 Comfort Edition, 2.0 GT Edition and 2.4 Comfort Edition 

                         

The publicity materials for information purposes only and 

is subject to change without notice, the Company has the final power 

of interpretation!

 

Summary of Contents for C7005BR








Reviews: