Road Bear RV Class A 29-32', Manual

Page: 30 / 40

30
3.8. Plumbing System
3.8.1. Fresh water
During “dry camping” or on the road fresh water is available out of the onboard
water tank. Water is transported to the faucets by means of the water pump. The
“ON/OFF” switch is located at the monitor panel (some models have additional
external switches in bathroom and/or outside.
The motor home has 2 fresh water sources:
- fresh water tank > on board (48-74 gal. depending on model)
- external city water hookup
You use the fresh water in the tank with the 12V water pump (located at the
monitor panel) for pressure while you do not have city water hookup meaning
while traveling or when dry camping. The city water hookup can only be used
when you are at a campground.
The fresh water tank can be filled through an opening on the side or on some
models with city water hookup. There is a valve either outside or inside the
vehicle which needs to be switched accordingly. The monitor panel shows the
freshwater level instantly.
Hint: Switch “OFF” the water pump while being connected to city water!
1 City fill and tank fill on P & Q:
City water hookup or while using
water pump - Keep valves upright
(as shown).
Freshwater tank refill – change
valves to “tank fill”. Once water tank
is full, water will overflow.
After tank
fill is completed change valves to
pump/city pressure.
Remark: Pump/city pressure will not
fill your fresh water tank.
2&3 City fill and tank fill on P, Q & S:
City water hookup on P & Q models:
Like picture 2. For water pump and
water fill switch valve to position 3
City water hookup and water pump
on S models like picture 2. For water
fill only switch valve to position 3
Hint: Make sure to return filler valves to the correct position after filling the tank!
For winterization: please call your pickup location for more info.
1
2 3