3
Getting started
Activating timer
To activate the timer, you must pull the small, clear plastic tab out of the battery
compartment, which is situated under the belt clip on the back of the timer. The
product will not function until this tab has been removed. If you have difficulty in pulling
the tab, then you can remove the battery cover (please take care when doing this), and
then take off the plastic tab, before replacing the cover.
Product features
Three independent functions: talking countdown timer, count up timer and talking
clock.
Six alarm sounds: cuckoo, bell, car horn, hopping coil, di di, whistling kettle.
The auto-repeat function allows you to automatically re-start the countdown as
many times as you want. A great feature for repetitive activities such as taking
medicine.
One memory function to store and recall your most frequently used countdown
time.
Designed for use on a desktop, magnetic attachment to a metal surface and can
also be attached to a belt.
Voice on/off – lets you turn off the voice announcements.
Using the product
Turning on/off the voice announcement
To turn on the voice, press the
VOICE ON/OFF
button until the timer beeps twice and
the symbol of a horn facing left with a cross through it disappears from the display.
To turn off the voice, press the
VOICE ON/OFF
button and the timer beeps once. The
symbol of a horn facing left with cross through it is shown on the display.
Please note:
even if the voice is turned off, there will still be an alarm sound when
counting down to 00:00:00.
Countdown timer
Move the slide-switch on the right edge to the
COUNT DOWN
(2
nd
) setting.
Press the
HR
,
MIN
and
SEC
buttons on the top row to set the hour, minute and second
respectively for countdown time. A voice announces the entered value (if voice
switched on). If you press and hold these buttons the hours, minutes and seconds will
advance quickly, although there will be no voice announcements.
