2
Hold the needle threader with the semi-circular buttons towards you.
Step 1
Carefully take your needle and place the eye of the needle in the tube that fits best,
with the pointed end upwards. Take care of the sharp point of the needle which will be
sticking out of the tube.
Step 2
Take your thread and lay it in the recessed slit nearest to the needle tube holding your
needle, ensuring that the short end is nearest to you.
Step 3
Slide the semi-circular button nearest the tube where you have placed your needle
towards the outer edge of the unit. This in turn pushes an internal metal probe through
the inside of the tube with the thread that was lying in the recessed slit through the
needle sitting in the tube.
Step 4
Release the circular button allowing the spring to return it to its central position. This
now leaves a small loop of thread sticking out from the outside of the needle tube. (The
thread can be felt on the outer edge of the tube towards the top.)
Take hold of the loop and gently pull through the thread until the short end of the
thread has pulled through fully.
Then gently remove the threaded needle ensuring when the “eye” is visible, you hold it
there to prevent the needle unthreading.
How to contact RNIB
Phone number: 0303 123 9999
Textphone: 0845 758 5691
Postal address: RNIB, PO Box 173, Peterborough PE2 6WS, U.K.
Email: [email protected]
Web address: www.rnib.org.uk
Email for international customers: [email protected]
Terms and conditions of sale
This product is guaranteed from manufacturing faults for 12 months from the date of
purchase. If you have any issues with the product and you did not purchase directly
from RNIB then please contact your retailer in the first instance.
For all returns and repairs contact RNIB first to get a returns authorisation number to
help us deal efficiently with your product return.
