rnib.org.uk
Using the product
Setting the volume
Press the
Talk
button on top of the clock to hear the time
announcement. You can then increase or decrease the volume by
using the rotary dial on the back.
Setting the clock
To set the time and/or alarm, or to activate the optional hourly
announcement, follow these instructions.
The square
Mode
button is used to enter the menu. To change the
settings of the function selected press the round
Set
button. At any
time during set up you can press the large
Talk
button to return to
current time announcement mode or you can simply proceed to the
next function by pressing the
Mode
button once more.
As you press the
Mode
button the menu is announced in the
following order:
Activating the hourly time announcement
Press the
Mode
button and the clock will say "announce off".
Press the
Set
button and the clock will say "announce on".
Pressing the
Set
button when in this mode will toggle between on
and off. When activated, the clock will announce the time on the
hour every hour.
Setting the alarm
Press
Mode
again and you will enter the alarm setting. The clock
will announce "alarm off". To change to “alarm on” press the
Set
button. Set the alarm time by pressing the
Mode
button again. The
clock will say "alarm hour" followed by the actual alarm hour
setting (e.g. "alarm hour 6"). Change this by pressing the
Set
button. The clock will announce each alarm hour as you cycle
through them. Press
Mode
to advance to the alarm minutes. The
clock announces "alarm minute" followed by the current alarm
minute setting. Change this using the
Set
button.
Note:
To
advance the minutes quickly press and hold the
Set
button and the
