RNG KIT-STCS100D, Owner'S Manual

Page: 5 / 16

4
3. Fully extend battery leads. Connect the red alligator clip to the positive (+) battery
terminal and the black alligator clip to the negative (-) battery terminal on a 12V battery.
Ensure that the connections are secure.
Note: The kit should be connected to a battery generating at least 9V to start the charge controller. If the
12V battery is fully discharged, charge it for a short period of time by other means to reach 9V.
4. When you connect the kit to the battery, the charge controller will display a boot up
message as follows:
Black Red
WELCOME
VERSION 1.23