RND 560‐00155 Soldering Station
3
LOW VOLTAGE OUTPUT WITH SAFETY OPERATION: The power unit is isolated from the A.C. line by a
transformer and allows 32VAC to drive the heating element. Solder wand runs from 32 Volts for safety
and with 100W high power ceramic heater for a super‐fast heat‐up and quick temperature recovery. The
solder wand is attached with a heat resistant, non‐burning, flexible 6‐wire cord.
ISOLATED IRON HOLDER WITH TIP CLEANER: Made of low abrasive brass shavings instead of conventional
sponges to meet RoHS requirement. Cleans better and no water is necessary.
ESD SAFE AND SPIKE FREE CIRCUITRY: The “Zero Voltage” electronic switching design also protects voltage
and current sensitive components (CMOS devices, etc.) against damaging current and transient voltage
spikes commonly produced by less efficient, mechanically switched stations.
DETACHABLE AC POWER CORD WITH PLUG: Engineered AC outlet for alternating AC power cord with plug
and connector specially designed for individual CE countries requirements.
EARTH JACK: With a grounding connector, there is the possibility for a grounding of the wire strap if
required.
PRODUCT DESCRIPTION
The high power electronically temperature controlled soldering station with microchip controllers was
developed to meet the present and future lead‐free soldering needs of the electronic production industry and
suitable for work on professional SMD electronics. An ergonomic handle with shorter distance between
heating element and tip gets very fast heat up time and quick heat compensation. A high‐quality sensor and
