Rhein-Nadel Automation GmbH
12
VT-BA-ESK2002_EN-2020 / 06.05.2020 SJ
5.
Operation
5.1.
General
Controller plug connections
Main disconnect
switch
Double-pole isolation of the controller from power supply
XS 3
Connector for sensors
Channel 1 (XS1)
Connector for vibratory feeder (<10 A)
Channel 2 (XS2)
Connector for linear feeder or AC motor (<4 A)
Channel 3 (XS5)
Connector for linear feeder or AC motor (<4 A)
XS 4
Connector for optocoupler outputs and external enabling inputs
The controller display (membrane keypad)
On / Off
Pressing this button switches off all connected devices. The display shows "OFF".
The controller remains ready for operation.
UP cursor and DOWN cursor
Use these buttons to scroll through the controller menu or set the parameters.
Enter
Press this button to acknowledge the parameters entered with the cursor.
Decimal point in display
The decimal point is not blinking. You cannot make any entry.
The decimal point is blinking, an entry can be made.
Main disconnect
On/Off
Cursor UP
Cursor DOWN
Enter
XS3
Chnl 1
Chnl 2
Chnl 3
XS 4
