CLEANING
Always sponge-off any spillage or contamination as soon as possible, with warm water and soap.
The Adductor Pads are fitted with removable covers. These can be wiped over with hot water
and soap. A mild hypochlorite solution (Milton) can also be used if preferred.
DO NOT use PHENOL based products on any waterproof coverings.
The covers should be left to thoroughly air dry before refitting.
IMPORTANT NOTE:
Gel-type Adductor Pads may be coated in talcum powder.
MAINTENANCE
The Adductors should be checked periodically for security, damage, correct positioning any
defects should be reported to the appropriate authority immediately.
Should the installer require further information on this, or any other product in the RMS Range,
please contact our Technical Help-line on 01795 477280
