RMG TME400, Operating Manual

Page: 84 / 156

4 Operation
MANUAL TME400-VCF · EN08 · July, 01 st 2021
78
X12
Delete parameter
archive (E)
724 W E
menu16
0 1 0
X13
Parameter archive (E)
fill level
725 R A
uint16
- - 0 %
Further information about the archives can be found in
Appendix B Structure of the
archives
.
4.3.3.10.
Settings
Coordi-
nate
Name Description
Z04
X:Y maximum pulse
error
A differential circuit compares the metered pulse of measuring and
comparison channels alternatingly. Every deviation is counted inter-
nally. An alarm is generated if the adjusted limit value is exceeded.
The failure counter is reset to 0 for each new measurement or after
the maximum number of pulses (Z05) is reached.
Z05
X:Y maximum pulse
see above
Z10 Error register 1
Display value
Z11 Error register 2
Display value
Z12 Status register 1
Display value
Z13 Status register 2
Display value
Z15 Code word release
Note
The code word for the TME400 is: 1 2 3 4
This is always displayed as " **** " in the parameter archive.
With entry of this code word, the protected parameters can be
changed.
Z16 Change code word
A new password can be defined here.
Z17 Device type
0 TME400-VM (default)
1 TME400-VC
2 TME400-VMF (MID)
3 TME400-VCF (MID)
Z24 Display active max.
0 1 minute (default)
1 5 minutes
2 60 minute test