23
6. Briefly press the power switch (
1
) on the IVS SDA.
Note:
The first time you connect your IVS SDA, the message “One Moment
Please” may appear on the video display. Depending on your network, this
message might appear for up to one minute. After the IVS SDA boots up, a
“Welcome” screen appears that displays the name of the IVS SDA, its serial
number, and the IP address that you'll need to set up your IVS SDA. Use this IP
address to access the Web Interface.
7. Refer to the following IVS SDA configuration guide to configure your IVS SDA-930:
http://support.rmgnetworks.com/documentation/
IVS_SDA_Configuration_v12.0.2.pdf
Supported Output Configurations
With the use of cables and/or dongles, you can set up the IVS SDA-930 to support
additional configurations of two or three outputs. Refer to the following document for
detailed descriptions of different output configurations that can be used with the IVS
SDA-930:
http://support.rmgnetworks.com/documentation/
