RME Audio MADIface XT, User Manual

Page: 39 / 110

User's Guide MADIface XT
© RME
39
19.3 Menu Keys MIC/GAIN and METERS
MIC/GAIN
This key brings up the
Mic Gain
screen, where the gain can be
directly controlled with encoder 1 and 2. Pressing encoder 1 and
2 activates the AutoSet function. The label AS in the display
changes from light gray to solid black.
METERS.
Brings up the Mix screen. Note that changes to the
current mix state can not be performed at the unit when it is
connected to a computer! This feature is a means to be able to
adjust or modify a routing/mixing when the unit is used stand-
alone. Proceed as follows:
Turn encoder 1 and select the desired output, for example
Mix to
Analog Out 1/2
. Now turn encoder 2 for the signal that should be
routed/mixed to Analog Out 1/2 – for example
Mic In 1
. Press
encoder 2 one time, so
Fader
gets selected. Turn encoder 2 to
adjust the gain for this routing, equalling the fader position of the
Mic In 1 input with selected Submix AN 1/2 in TotalMix FX.
As with the other three keys pressing METERS a second time returns the display to the global
level meter screen showing all inputs, outputs and FX send/return levels, DSP load meter, cur-
rent interface mode, digital input state of all 5 inputs and MIDI state.
19.4 Channel Menu
All channels have the following entries in Settings:
Mute
Mutes a channel. Allows to remove a signal without the need to change the current gain/volume
setting.
Channel Type
Mono / Stereo.
Phase Invert
Phase Invert changes the polarity (180°). Useful to fix wrongly soldered cables or to eliminate
sound and phase errors.
All input channels have these additional entries:
M/S-Proc
Activates M/S processing within the stereo channel. Monaural
information is sent to the left channel, stereo information to the
right.
FX Send
Sets the level of the signal sent to the FX bus which feeds Echo
and Reverb effect.