5. Within the
Firmware Update
section, press the
Select .swu Firmware File
button and locate the
unpacked file.
6. Press
Start Firmware Update
.
The unit retains all settings, including presets, when the firmware is upgraded.
2.2. Use of the Display and Encoder
The M-32 DA Pro can be controlled directly at the unit. For this purpose, a display and an encoder
provide access to all features.
• Rotating the encoder when the standby screen is shown highlights one of four sections.
• Pushing the encoder when the screen is idle activates the previously active tab.
• Pushing the encoder when a section is highlighted opens the corresponding section.
2.2.1. Sections
All control items are categorized into four sections:
•
STATE
for general settings
•
INPUT
for audio input related settings
•
OUTPUT
for audio output related settings and routing
•
CLOCK
for digital clock related settings
1
2
3
To access the INPUT section:
RME M-32 DA Pro User’s Guide
2.2. Use of the Display and Encoder |
3
