50
User's Guide HDSP System Multiface
© RME
28.2 The User Interface
The visual design of the TotalMix mixer is a result of its capability to route hardware inputs and
software playback channels to any hardware output. The Multiface provides 18 input channels,
18 software playback channels, and 20 hardware output channels:
36 channels don't fit on the screen side by side, neither does such an arrangement provide a
useful overview. The input channel should be placed above the corresponding output channel.
Therefore, the channels have been arranged as known from an
Inline
desk, so that the row
Software Playback
equals the
Tape Return
of a real mixing desk:
•
Top row: Hardware inputs. The level shown is that of the input signal, i. e. fader independ-
ent. Via fader and routing field, any input channel can be routed and mixed to any hardware
output (bottom row).
•
Middle row: Playback channels (playback tracks of the audio software). Via fader and rout-
ing field, any playback channel can be routed and mixed to any hardware output (third row).
•
Bottom row (third row): Hardware outputs. Here, the total level of the output can be ad-
justed. This may be the level of connected loudspeakers, or the necessity to reduce the
level of an overloaded submix.
The following chapters explain step by step all functions of the user interface.
Summary of Contents for Hammerfall Multiface
Page 5: ...User s Guide HDSP System Multiface RME 5 User s Guide Multiface General ...
Page 49: ...User s Guide HDSP System Multiface RME 49 ...
Page 69: ...User s Guide HDSP System Multiface RME 69 User s Guide Multiface Technical Reference ...
Page 80: ...80 User s Guide HDSP System Multiface RME 36 Diagrams 36 1 Block Diagram Multiface ...
