background image

 

 

User’s Guide HDSP System Digiface 

© RME

 

29

 

 

20. Warranty

 

 
Each individual Hammerfall DSP undergoes comprehensive quality control and a complete test 
in a PC environment at RME before shipping. This may cause very slight signs of wear (if it 
looks like it was used one time before - it was). The usage of high grade components allows us 
to offer a full two year warranty. We accept a copy of the sales receipt as valid warranty 
legitimation. 
 
RME’s replacement service within this period is handled by the retailer. If you suspect that your 
card is faulty, please contact your local retailer. The warranty does not cover damage caused 
by improper installation or maltreatment - replacement or repair in such cases can only be 
carried out at the owner’s expense. 
 
RME does not accept claims for damages of any kind, especially consequential damage. 
Liability is limited to the value of the Hammerfall DSP. The general terms of business drawn up 
by Synthax OHG apply at all times. 
 
 

21. Appendix

 

 
RME news, driver updates and further product information are available on our website: 
 
http://www.rme-audio.com 
 
If you prefer to read the information off-line, you can load a complete copy of the RME website 
from the RME Driver CD (in the 

\rmeaudio.web

 directory) into your browser. 

 
 
 

Trademarks

 

 
All trademarks, registered or otherwise, are the property of their respective owners. RME, 
DIGI96, SyncAlign, SyncCheck, ZLM and Hammerfall are registered trademarks of RME 
Intelligent Audio Solutions. DIGICheck, , TotalMix and TMS are trademarks of RME Intelligent 
Audio Solutions. Alesis and ADAT are registered trademarks of Alesis Corp. ADAT optical is a 
trademark of Alesis Corp. Microsoft, Windows, Windows 98/2000/XP are registered trademarks 
or trademarks of Microsoft Corp. Apple and MacOS are registered trademarks of Apple 
Computer Inc. Steinberg, Cubase and VST are registered trademarks of Steinberg Media 
Technologies AG. ASIO is a trademark of Steinberg Media Technologies AG. emagic and 
Logic Audio are registered trademarks of emagic Soft- und Hardware GmbH. Pentium is a 
registered trademark of Intel Corp. 
 

Copyright 

 Matthias Carstens, 3/2002. Version 1.4 

Current driver version: 2.10 

 

Although the contents of this User’s Guide have been thoroughly checked for errors, RME can not guarantee that it is correct 
throughout. RME does not accept responsibility for any misleading or incorrect information within this guide. Lending or 
copying any part of the guide or the RME Driver CD, or any commercial exploitation of these media without express written 
permission from RME Intelligent Audio Solutions is prohibited. RME reserves the right to change specifications at any time 
without notice. 

Summary of Contents for DIGIFACE


































Reviews: