RME Audio Digiface Ravenna, User Manual

Page: 56 / 73

56 User's Guide Digiface Ravenna
© RME
21. MIDI Remote Control
21.1 Overview
TotalMix can be remote controlled via MIDI. It is compatible to the widely spread Mackie Control
protocol, so TotalMix can be controlled with all hardware controllers supporting this standard.
Examples are the Mackie Control, Tascam US-2400 or Behringer BCF 2000.
Additionally, the stereo output faders (lowest row) which are set up as
Main Out in the Control
Room section can also be controlled by the standard Control Change Volume via MIDI channel
1 . With this, the main volume of the Digiface Ravenna is controllable from nearly any MIDI
equipped hardware device.
MIDI Remote Control always operates in View
Submix mode, even when the View Option Free is
currently selected in TotalMix FX.
21.2 Mapping
TotalMix supports the following Mackie Control surface elements*:
Element: Meaning in TotalMix:
Channel faders 1
– 8
volume
Master fader Main Monitor channel's faders
V-Pots 1
– 8
pan
pressing V-Pot knobs pan = center
CHANNEL LEFT or REWIND
move one channel left
CHANNEL RIGHT or FAST FORWARD move one channel right
BANK LEFT or ARROW LEFT move eight channels left
BANK RIGHT or ARROW RIGHT move eight channels right
ARROW UP or Assignable1/PAGE+ move one row up
ARROW DOWN or Assignable2/PAGE- move one row down
EQ
Master Mute
PLUGINS/INSERT Master Solo
STOP Dim Main Out
PLAY Talkback
PAN Mono Main Out
FLIP
Speaker B
DYN/INSTRUMENT TrimGains
MUTE Ch. 1
– 8
Mute
SOLO Ch. 1
– 8
Solo
SELECT Ch. 1
– 8
Select
REC Ch. 1
– 8
select output bus (Submix)
RECORD Recall
F1 - F8
load Snapshot 1 - 8
F9 select Main Out
F10 - F12 select Cue Phones 1 - 3
*Tested with Behringer BCF2000 Firmware v1.07 in Mackie Control emulation for Steinberg mode and with Mackie Control
under Mac OS X.