User's Guide AO4S-192 AIO
3
1. Introduction
Thank you for choosing the AO4S-192. This analog expansion board adds 4 analog outputs in
professional quality to RME's HDSPe AIO. Level adjustment, balanced circuit design, 118 dBA
SNR and highest suppression of PC-noise guarantee perfect sound quality.
2. Package Contents
Please ensure that all the following parts are included in the AO4S-192 AIO's packaging box:
•
Analog Expansion Board
•
1 flat ribbon cable, 26 pins
•
1 set of nuts
•
Manual, drill template
3. Hardware Requirements
The AO4S-192 AIO can only be connected to the HDSP 9632. No more than one AO4S-192
can be connected to each card.
4. Technical Specifications
•
Resolution DA: 24 Bit
•
Signal to Noise ratio (SNR): 114 dB RMS unweighted, 118 dBA @ 44.1 kHz (unmuted)
•
THD: < - 104 dB, < 0.00063 %
•
THD+N: < -102 dB, < 0.0008 %
•
Crosstalk: > 110 dB
•
Maximum output level: +19 dBu
•
Frequency response @ 44.1 kHz, -0.5 dB: 1 Hz – 22 kHz
•
Frequency response @ 96 kHz, -0.5 dB: 1 Hz – 34 kHz
•
Frequency response @ 192 kHz, -0.5 dB: 1 Hz – 50 kHz
•
Output: 4 x 1/4" TRS jack, servo balanced
•
Output impedance: 50 Ohm
•
Output level: Hi Gain, +4 dBu, -10 dBV
•
Output level at 0 dBFS @ Hi Gain: +19 dBu
•
Output level at 0 dBFS @ +4 dBu: +13 dBu
•
Output level at 0 dBFS @ -10 dBV: +2 dBV
•
Power supply via flat cable
•
Standard bracket, board dimensions: 90 x 95 mm
