background image

 

 

User's Guide 

ADI-2 FS  © RME

3

 

1. Introduction

 

 
With the ADI-2 FS, RME introduces the successor to the renowned ADI-2. Although the ADI-2 
FS has been completely redesigned – for example with the complete analog input stage of the 
award-winning  ADI-2  Pro  -  it  still  has  the  same,  easy  operation  and  I/Os  as  its  predecessor. 
During its development some useful improvements were also added. The step-less adjustment 
of  the  rear  output  level  can  be  activated  directly  on  the  front instead of internal jumpers. The 
new ANA option, which realizes an analog bypass from the analog input to the analog output, 
gives the ADI-2 FS a cornucopia of applications beyond AD and DA conversion. And naturally 
the ADI-2 FS comes with RME's latest SteadyClock. 
 
Mute relays on XLR and Phones Out and four times the output power at the headphone output 
with  only  0.1  ohm  output  impedance  make  the  ADI-2  FS,  among  other  things,  an  ideal,  low-
priced  supplement  to  all  RME  interfaces  up  to  the  ADI-2  Pro.  The  ADI-2  FS  provides  these 
devices with two additional analog inputs and outputs and an additional headphone output. 
 
The  ADI-2  FS  is  a  high  quality,  yet  highly  flexible  and  universally  applicable  tool.  Advanced 
circuit  technology  combined  with  latest  integrated  circuits  result  in  a  unique  and  outstanding 
device, meeting highest quality standards. The ADI-2 FS will excite you even after many years 
of operation. The ADI-2 FS works as: 
 

x

  AD/DA converter in professional studio quality 

x

  Powerful headphone amplifier with analog and digital input 

x

  Multi-format converter (AES, SPDIF, ADAT) with monitoring 

x

  SPDIF/ADAT playback system 

x

  Analog impedance converter 

x

  Analog level adaptation 

x

  Analog balanced converter (unbalanced to balanced) 

x

  Analog distribution amp 

 
 

2. Supplied Contents

 

 
Please check that your ADI-2 FS package contains each of the following: 
 

x

  ADI-2 FS 

x

  User's guide 

x

  External switched power supply, lockable connector, DC 12 V 24 W 

x

  Power cord 

 
 

3. Brief Description and Characteristics

 

 
The ADI-2 FS is a 2-channel analog to digital and digital to analog converter in a half-rack (9.5") 
enclosure of 1 U height. Latest 24 bit / 192 kHz converters offer 120 dBA dynamic range. This 
value is not only printed in the brochure – it is what the unit achieves in real-world operation. 
 
The  servo-balanced  analog  inputs  and  dedicated  balanced  and  unbalanced  outputs  are  fitted 
with both XLR and 1/4" TRS/TS jacks. The unit's analog input stage uses a fully balanced and 
DC-coupled circuit design, for highest phase accuracy at lowest roll-off. 
 
The Hi-Power² headphone output provides reference sound. The digital inputs and outputs are 
available as SPDIF coaxial (AES/EBU compatible), SPDIF optical and ADAT optical. 

Summary of Contents for ADI-2 FS





















Reviews: