TILLER CONTROLS
Speed control
The speed control allows you to set varying
speeds between tortoise minimum and hare
maximum up to 6km/h.
LEVER CONTROLS
“T” Tillers (Fig. 5)
Located at the front of the tiller, the right
thumb lever controls the forward and the left
lever the reverse motion of the scooter. The
amount of pressure applied to each lever will
determine the speed the scooter will travel at. Release the lever and the scooter will
slowly come to a stop and the magnetic brake will be applied.
“V” Tillers (Fig. 6)
Fitted on the right side of the tiller handle bar is the lever controller. The amount of
pressure applied to the lever will determine the speed the scooter will travel at, use the
switch located at the front of the on/off key on the centre pod for reverse drive
application. Release the lever and the scooter will slowly come to a stop and the
magnetic brake will be applied.
Battery Level Indicator
The battery level indicator has three
segments: red; yellow; green; with a needle
float. The coloured segment in which the
needle is resting shows the amount of charge
left in the batteries. When the needle reaches
the red segment the batteries should be
recharged. Leaving the needle in the red
segment may cause the batteries to be
completely discharged, and this could cause
irreversible damage.
C
i
D
ll
h i di
dl
ll h
h
d
Fig. 6
Fig. 5
Summary of Contents for Shopride Napoli S-787L
Page 1: ...S 787L USER MANUAL Napoli ...
