RL R037-06, Manual

Page: 6 / 82

Keep all safety instructions and instructions for future reference.
Only clean the device when it is switched off and with the mains plug unplugged. Use a soft, lint-free cloth. This can be
slightly moistened if necessary. Avoid contact with electrical components and moisture. After cleaning, allow the device to
dry completely before putting it back into operation. Do not use aggressive cleaning agents.
Care
Before commissioning, please check the correct installation of the protective screens again; there is a risk of injury if they
are not installed correctly. Generally, the device may only be operated when completely assembled. Make sure that the
connected supply cable is free of damage. Never operate a device with a defective supply cable. There is a risk of electric
shock. Position the device upright and stable. When positioning the fan, make sure that curtains or other objects do not
obstruct the air flow. Insert the power plug into a properly fused power socket.
Commissioning
1. Guard Decoration
Assembly
3. Clip
2. Front Guard
5. Fan Blade Securing Screw
4. Fan Blade
7. Back Guard
6. Back Guard Securing Screw
9. Motor Shaft
8. Carrying Handle
11. Oscillating Knob
10. Speed control Knob
13. Coupling
12. Fan Head Motor
15. Height adjustable knob
14. Pole
17. Weight
16. Base
19. Locking Leaver
18. Washer
21. Tilt Range Screw
20. Tilt Range Knob
23. Tilt Adjustment Knob
22. Tilt Range Hole
24. Tilt Adjustment Bolt