RL R032-01, Manual, Page: 6 / 56

Keep all safety instructions and instructions for future reference.
Only clean the device when it is switched off and with the mains plug unplugged. Use a soft, lint-free cloth. This can be
slightly moistened if necessary. Avoid contact with electrical components and moisture. After cleaning, allow the device to
dry completely before putting it back into operation. Do not use aggressive cleaning agents.
Care
Before commissioning, please check the correct installation of the protective screens again; there is a risk of injury if they
are not installed correctly. Generally, the device may only be operated when completely assembled. Make sure that the
connected supply cable is free of damage. Never operate a device with a defective supply cable. There is a risk of electric
shock. Position the device upright and stable. When positioning the fan, make sure that curtains or other objects do not
obstruct the air flow. Insert the power plug into a properly fused power socket.
Commissioning
1. Base
Assembly
3. Nut
2. Body
e) Guide the cable tight through the groove in the outer rim of the base.
d) Place the fan unit on top of the base, aligning two holes on the base and fan body then tighten with nut (3).
a) Unscrew fixing nut (3).
c) Push the two base plates together.
b) Guide the cable through the center of the base (1).
Power Rating: 50 W
Technical Information
Fan Sound Power Level: 46,2 // 47,7 // 49 dB(A)
Service Value: 0,13 (m³/dak.)/W
Max. Air Velocity: 3,2 // 3,9 // 4,2 m/s
Max. Fan Flow Rate: 5,27 m³/min
Stand By Power Consumption: 0 W