22 • T2A Transmitter
Magnetic Buttons
Use the provided magnet to actuate the T2A’s buttons without having to remove the junction
box’s lid. Touch the magnet to the outer edge of the junction box lid near the button you want
to actuate. Tapping the junction box is the same and pressing and releasing the button.
Holding the magnet against the junction box is the same as pressing and holding the button.
Powering the Device
When power is first applied to the T2A, the unit automatically powers on and begins the
startup sequence. The directions below describe how to power off and power on the T2A once
power has been applied.
Powering Off
Powering off the device stops the operation of the unit. The Product Settings and
Configuration, as well as the operation settings, including the zero and calibration of the
sensor, will be unaffected.
1. Press and hold the SUB button for approximately 6 seconds, until “OFF” shows on the
display screen.
2. The display screen will continue to show “OFF” for the duration of time that the unit is
powered off, as long as uninterrupted power is supplied to the unit.
Touch magnet here to
activate MENU button
Touch magnet here to
activate ADD button
Touch magnet here to
activate SUB button
www.
GlobalTestSupply
.com
Find Quality Products Online at:
