5.&2'HWHFWRU
6WDUW8S
7KLVVHFWLRQGHVFULEHVSURFHGXUHVWRVWDUWXSWKH&2GHWHFWRUDQGSODFHWKHGHWHFWRULQWR
QRUPDORSHUDWLRQ
,QWURGXFLQJ,QFRPLQJ3RZHU
&RPSOHWHWKHLQVWDOODWLRQSURFHGXUHVGHVFULEHGHDUOLHULQWKLVPDQXDO
9HULI\WKDWWKHSRZHUZLULQJWRWKHFRQWUROOHULVFRUUHFWDQGVHFXUH5HIHUWRWKHFRQWUROOHU
RSHUDWRU¶VPDQXDO
7XUQRQSRZHUWRWKHFRQWUROOHU
7XUQRQWKHFRQWUROOHU
9HULI\WKDWWKHFRQWUROOHULVRQDQGRSHUDWLQJSURSHUO\5HIHUWRWKHFRQWUROOHURSHUDWRU¶V
PDQXDO
CAUTION: Allow the detector to warm up for 5 minutes before you continue with the next
section, “Setting the Zero (Fresh Air) Reading”.
6HWWLQJWKH=HUR)UHVK$LU5HDGLQJ
WARNING: If the detector installation is explosion proof, do not remove the detector
housing cap or junction box cover while the circuits are energized unless the
area is determined to be non-hazardous. Keep the detector housing cap and
junction box cover tightly closed during operation.
CAUTION: If you suspect the presence of CO in the monitoring environment, use the
calibration kit and a zero air calibration cylinder to introduce “fresh air” to the
CO detector and verify an accurate zero setting. See “Calibration” on page 17
for instructions to introduce zero air to the CO detector.
9HULI\WKDWWKHGHWHFWRULVLQDIUHVKDLUHQYLURQPHQWHQYLURQPHQWNQRZQWREHIUHHRI
FDUERQPRQR[LGHRWKHUWR[LFDQGFRPEXVWLEOHJDVHVDQGRIQRUPDOR[\JHQFRQWHQW
9HULI\DUHDGLQJRISSP&2DWWKHFRQWUROOHU
,IWKHGLVSOD\UHDGLQJLVSSP&2VWDUWXSLVFRPSOHWH7KHGHWHFWRULVLQQRUPDO
RSHUDWLRQ,IWKHGLVSOD\UHDGLQJLVQRWSSP&2FRQWLQXHZLWKVWHS
3HUIRUPD]HURLQJRSHUDWLRQDWWKHFRQWUROOHU6HHWKHFRQWUROOHURSHUDWRU¶VPDQXDOIRU
GLUHFWLRQV
www.
.com
1.800.561.8187