Personnel:
n
Assembly staff
Protective equipment:
n
Protective clothing
n
Protective gloves
n
Safety shoes
Prerequisite:
n
The substrate must be prepared for the linear unit being fixed to
it.
1.
Insert slot stones (Fig. 16/1) into the slot(s) on the underside
of the guide profile (Fig. 16/2).
When assembling an RK MonoLine R linear
unit, the end plates (sizes: 40 x 40, 60 x 60,
80 x 80, 120 x 120) or the end caps (sizes:
80 x 120, 80 x 160) have to be removed as
necessary before the slot stones can be
inserted sideways.
When assembling an RK MonoLine Z linear
unit, the end caps (sizes: 80 x 120, 80 x 160)
have to be removed as necessary before the
slot stones can be inserted sideways.
Depending on the length and size of the linear unit,
2 or more slot stones must be inserted on the
underside of the guide profile.
Fig. 17: Positioning slot stones
A RK MonoLine R, Z 40/60
B RK MonoLine R, Z 80/120
2.
Ensure that a distance of 300 mm between the slot stones
(Fig. 17/1) is not exceeded at maximum load.
Inserting slot stones
Fig. 16: Inserting slot stones
Positioning slot stones
Assembly
Assembling the linear unit on the substrate > Assembling a linear unit with slot stones
14.10.2021
Linear unit RK MonoLine R/RK MonoLine Z
98
