RJX Hobby VECTRON, Assembly Manual

Page: 36 / 36

In- Flight.
Do not fly your RJX VECTRON 520 near any houses,
high voltage wires or busy roads.
Be sure to fly within the range of your radio.
Always keep your eyes on your model when flying, it
can change attitude or get out of sight in a very short
time.
Never hover with the rotor at eye level. Be sure to keep
the model at a safe height and altitude.
If you feel that something is wrong with your model
while flying, land it immediately and check it over. Do
not take any chances.
Post-Flight.
When the rotor speed has slowed sufficiently, use the
palm of your hand on the center hub to bring it to stop.
Check to ensure that nothing has come loose.
If the main rotor or other parts have made contact with
the ground: DO NOT take any chances. Replace
them before the next flight even if they look to be in
good condition.
Make sure the receiver, battery and gyro are still
secure.
Perform periodical checks of the helicopter to make sure there
is no damage or loose screws.
Important screws like spindle
or main shaft screws as example should be exchanged
periodically.
Check all bearings to ensure they work smoothly
- they can cause glitches if they are damaged.
Page 35
c Copyright 2014 WWW.RJX HOBBY.COM
CAUTION