9
Switch Invert
You can use the A button to invert the sense of the Switch jack. If the
A button is lit, the Switch jack is inverted. If not lit, it’s set to the
normal state.
This is particularly useful if you’re using a lighted footswitch to
control the Y-Not. Some footswitches will behave the opposite of
what you’d expect: the A/B button turns on the A output when lit,
and the Both button turns on both outputs when it’s
not
lit. Turning
on this option makes the footswitch operate normally.
Bank Select Enable
You can use the B button to enable MIDI bank select. If the B button
is lit, the Y-Not will respond to MIDI bank select (CC#0, values 0 and 1
only). If the B button is not lit, the Y-Not will ignore MIDI bank select
messages.
Saving Options
Once you’ve set the desired options, press the Write button. The Y-
Not is now in normal operational mode.
Factory Reset
You can factory reset the Y-Not by holding the A and Write buttons
as you power it up. Keep holding the buttons for about 3 seconds –
the lights on the Y-Not should turn on briefly, then turn off. The Y-
Not is now returned to its factory state.
