RJG Lynx ID7-M-SEQ, Product Manual

Page: 24 / 26

Lynx™ Shielded Sequence Module ID7‑M‑SEQ | Product Manual 18 RJG, Inc.
SIMILAR PRODUCTS
The following products, similar to the
ID7‑M‑SEQ, are compatible for use with the
eDART process control and monitoring system.
LYNX COMMUNICATIONS ADAPTER
DIN/LX‑D
The Lynx communications adapter DIN/LX‑D
(
1
at right )is a shielded, DIN‑rail‑mounted
module that interfaces other RJG, Inc. shielded
machine interface modules with the
eDART
system when the ID7‑M‑SEQ is not used. This
module is shielded to ensure high quality data
even in rugged molding environments, and
designed to be mounted on standard 35 mm
DIN rails often found in machine panels.
LYNX SHIELDED DUAL‑RELAY OUTPUT
MODULE OR2‑M
The Lynx shielded dual‑relay output
module OR2‑M (
2
at right ) is a shielded,
DIN‑rail‑mounted module that interfaces the
eDART and sorting equipment or injection
molding machines to implement part
containment or control transfer. This module
is shielded to ensure high quality data even in
rugged molding environments, and designed to
be mounted on standard 35 mm DIN rails often
found in machine panels.
LYNX SHIELDED ANALOG INPUT MODULE
IA1‑M‑V
The Lynx shielded analog input module IA1‑M‑V
(
3
at right )is a shielded, DIN‑rail‑mounted
module that interfaces the eDART and
injection molding machines in order to collect
0–10 V DC signals from analog measurement
devices, providing information such as: injection
pressure, plastic pressure, screw position, and
temperature.
1
2
3