www.rizebeds.com +1-800-333-8333 [email protected]
Stop Button
How to reset your system
After you have saved a new position into your remote, you will need
to reset it to go back to the factory default settings that come with
the Aviada. This clears all custom settings and will also unpair two
bases that were synced to operate together.
Step 1:
press and hold the “stop” button on the remote control
while removing and reinstalling one of the three batteries.
Step 2:
keep holding the stop button for seven seconds.
Step 3:
The lights on the remote control will blink five times. Both
The base and the remote are now reset.
Step 4:
to pair one remote to both bases again, Follow the steps on
page one: “How to Sync two beds to one remote.”
Step 5:
to pair one remote to each base so that they will operate separately, unplug both bases and
wait 30 seconds. Plug the first base back in and press any button on the remote control until the
light on the remote illuminates. Do the same with the second base.