- 2 -
E.
Instrument Description
(Please see the right photo.)
(A) LCD display
(B) Conversion of resistance mode and temperature unit
(C) Resistance measurement and data hold
(D) On/off button and backlight button
(E) Ground wire jack
(F) Measurement electrode
(G) Battery cover
F.
Operation Instruction
1. Power On
Press " " button to turn on the instrument. About 1 sec., the instrument will be ready to measure.
2. Resistance Display Mode
Press " " to switch the resistance display mode: Order of magnitude mode/conventional mode.
3. Backlight
After power on, press " " button to turn on/off the backlight.
4. Temperature Unit Conversion
Long press " " button to switch the temperature units: Celsius (°C) and Fahrenheit (°F).
5. Resistance Measurement
After turning on the instrument, put the instrument on the surface of measured object, press and hold
" " key to start measurement, at the same time, the “TEST” indicator will be displayed.
During measurement, resistance display area displays "----" (on normal mode) or "--x-" (on order of
magnitude mode), indicating that the instrument is measuring.
After the resistance value is measured, the resistance value will be displayed in resistance display area.
When the resistance value is higher than measurement range, resistance display area will show “HI”.
When the resistance value is lower than the measurement range, the “Lo” will be displayed.
After releasing the measurement button, the measurement will finish and the
data will be held,
"HOLD" indicator shows up simultaneously.
6. Shutdown
After power on, long press " " button to shut down.
If there is no operation within 30 seconds, the instrument will shut down automatically.
※
Specific Declarations :
Our company shall hold no any responsibility resulting from using this product as a direct or
an indirect evidence. We reserve the right to modify product and specification without notice.
SR496-1607-EN02
