3.6 skids adjustment
Knives allow you to
work in deep snow.
Remove the nuts and
bolts (1.2). The blades
rotate 180 degrees
upward. Tighten the
through bolts and nuts.
3.7 Installation and
adjustment of the skids and rails bunker
Mounting rails bunker
Attach the rail to bottom edge of the bunker with bolts and nuts (5,6).
Adjusting the skids
Unscrew the nut (2) and screws (3).
Remove the base (1) on either side of the bunker.
Adjust the base (1) so as to strip the bunker (4) was about 2 cm above the ground level.
