Riviera Srl Genova
Manuale istruzioni
Don't expose any cables out of car. Please take care insulated cables to avoid damaging when
cables pass through metal, rubber and plastic etc. Don't install all cables too tight.
The ground wire should be connected directly with the chassis of your vehicle which should be
metal to metal ground point connection.
The amplifier must be mounted securely at a solid, dry and low vibration surface in the trunk or
passenger area. Fix the amplifier in an open air area to insure proper heat dissipation.
Fissare L’amplificatore tramite le 4 viti in dotazione
Use attached screws to fix the amplifier to the chosen place
Si raccomanda di leggere attentamente le istruzioni prima di procedere all’installazione.
Be sure to carefully read and under stand the instructions before attempting to install the
amplifier
Pag.
10
di
21
