- 58 -
7
Troubleshooting and Fault repair
The Freeset by RivetKing® is a very stable and long-lasting tool.
If, however, a tool does not work properly you can find, and eliminate, the most frequent
causes for errors in the table below.
Tool does not start,
sound signal, red
Light field appears
1.
Battery empty
2.
Defective battery
1.
Replace and charge battery
2.
Replace battery
Rivet does not break off
- Dirt in clamping jaw
-
Clamping jaw is worn
-
Tool stroke too short
for the rivet
-
Setting in the program config-
uration
-
Clean clamping jaws
-
Replace clamping jaw
-
Check which stroke is required
for setting
-
Check setting
If the error still persists or is not listed, please contact RivetKing®.
Repairs:
Telephone: 201-750-1040 Option 4
E-mail:
Programming:
Telephone: 201-750-1040 Option 4
E-mail:
Please note the following information:
•
Serial number of the riveting device (see battery compartment of the device)
•
What error has occurred?
•
Display
•
When did the error first appear?
•
What have you done to fix the error?
We reserve the right to make errors, technical changes to our products and changes to the
delivery program in the course of further development.
Error
Possible cause
Remedy