Riverstone Networks RS 3000, Getting Started Manual

Page: 31 / 103

Riverstone Networks RS 3000 Switch Router Getting Started Guide 2-11
Introduction Hardware Features
AC Power Supply
The AC power supply provides enough current to operate a fully configured chassis. On the back end of the supply is
the AC power cord socket. See
Figure 2-2 .
Figure 2-2 AC power supply with power cord socket
Note
The RS 3000 does not have an on-off switch. When you plug the AC power supply
into a power source, the router is on.
Warning
When using an AC power supply, be sure to plug the router into a
single-phase grounded power source located within 6 feet of the installation
site.
DC Power Supply
The DC power supply provides enough current to operate a fully configured chassis. On the back end of the supply is
the three-terminal wiring block. See
Figure 2-3 .
Table 2-4 AC power supply specifications
Input Output
100-240 VAC at 5A, 50-60
Hz 3.45 VDC at 58A maximum, 5.15
VDC at 6.5A maximum, and 12 VDC
at 0.6A maximum