Page 3 of 7
Oakmont
Bedroom
Assembly Instructions
Made in Viet Nam
email: [email protected]
FURNITURE
Riverside
ASSEMBLY STEPS :
1. Place the Headboard Panel (H-A) face down on a clean and soft surface.
2. Attach the Headboard Bun feet (H-B) to the bottom of the Headboard. (see Detail A).
3. Attach the Left and Right Headboard Posts (H-C) to the back of the Headboard Panel,
using the Flat Washers (H-G), Spring Washers (H-F) and Bolts (H-E). Do not fully
tighten until after next step. (see Detail B).
4. Attach the Back Stretcher (H-D) to the Headboard Posts using the same Washers and
Bolts as previous step. Tighten Bolts connecting Stretcher with the Allen Wrench (H-I).
(see Detail C). Tighten Bolts connecting Headboard Posts to Headboard Panel.
Gently lean the back of the assembled Headboard against the wall where the Bed will be
located in the room.
