Page 2 of 4
Aberdeen
King Bed
Assembly Instructions
Made in Viet Nam
email: [email protected]
FURNITURE
Riverside
ASSEMBLY STEPS :
1. Place the Headboard Panel (H-A) face down on a clean and soft surface.
2. Attach the Left and Right Headboard Posts (H-B) to the back of the Headboard Panel,
using the Flat Washers (H-F), Spring Washers (H-E) and 1-3/4" Long Bolts (H-D). Do
not fully tighten until after next step. (see Detail A).
3. Attach the Headboard Stretcher (H-C) to the Headboard Posts using the same Washers
and Bolts (H-D) as in previous step.
4. Tighten all Bolts using the Allen Wrench (H-G). (see Detail A & B).
Gently lean the back of the assembled Headboard against the wall where the Bed will be
located in the room.
