Made in Viet Nam
Page 2 of 4
Precision
Bed Room
Assembly Instructions
email: [email protected]
Detail 2
: Assemble the Left (B) and Right Side
Panels (C) to the Top (A) and Bottom Frame (D)
using the 1-1/2" Long Bolts (H), Spring Washers
(K) and Flat Washers (L). Adjust fit of all parts
and tighten Bolts with the Allen Key (M).
C
H
K
L
M
H
K
L
M
Detail 3
: Set the assembled Top
and Sides upright. Assemble the
Back Panel (E) to the back side
using the 1-1/2" Long Bolts (H),
Spring Washers (K) and Flat
Washers (L). Adjust fit of all
parts if necessary and tighten
Bolts with the Allen Key (M).
H
M
K
L
E
Detail 1
: Remove the drawer from the Top (A)
and lay it aside. To remove the drawer, pull the
drawer fully open so the black latch is visible in
the inside channel of the guides. Release the
latches by simultaneously pushing one lever up
and the other down. At the same time, pulling
the drawer forward until the slides release.
Position the Top on its back, as shown.
