1. Attach lower left side panel (10) and lower right side panel (11) to lower left support board (13)
and lower right support board (14) by inserting 8 screws (O) through holes on lower left side
panel (10) and lower right side panel (11), then tighten to lower left support board (13) and
lower right support board (14).
1. Insert 6 long wood dowels (D) into wood dowel holes on upper left side panel (2), upper
right side panel (3), upper left support board (5) and upper right support board (6).
2. Attach middle connection board (8) to upper left side panel (2), upper right side panel (3),
upper left support board (5) and upper right support board (6) by inserting wood dowels (D)
through holes on middle connection board (8).
3. Insert 4 screws (L) through holes on middle connection board (8), then tighten to upper left
side panel (2) and upper right side panel (3).
4. Insert 2 screws (P) through holes on upper cross bar (4), then tighten to top board (1).
STEP 11
STEP 12
2
.
Insert 2 screws (P) through holes on lower cross bar (16), then tighten to bottom board (15).
