STEP 1
1. Screw 4 cam bolts (A) into cam bolt holes on top board (1).
2. Attach 1 metal bracket (F) to top board (1) by inserting 1 screw (Q) through hole on metal bracket
(F) and tighten to top board (1).
3. Screw 4 cam bolts (A) into cam bolt holes on middle connection board (5).
4. Attach magnet (D) to middle connection board (5) by inserting 2 screws (E) through holes on
magnet (D) and tighten to middle connection board (5).
STEP 2
1. Screw 1 cam bolt (A) into cam bolt hole on upper left side panel (2).
2. Screw 1 cam bolt (A) into cam bolt hole on upper right side panel (3).
STEP 3
1. Screw 2 cam bolts (A) into cam bolt holes on lower left side panel (9).
2. Screw 2 cam bolts (A) into cam bolt holes on lower right side panel (10).
