1. Attach 4 wood legs (12) to bottom board (11) by inserting 4 screws (E) through holes on bottom
board (11), then tighten to wood legs (12).
1. Insert 9 wood dowels (C) into wood dowel holes on left side panel (5).
2. Slide upper back board (13) into grooves on top board (4), lower shelf (9) and middle support panel (8).
3. Attach left side panel (5) to pre-assembled unit by inserting wood dowels (C) into wood dowel holes
and inserting cam bolts (A) into cam lock holes on lower shelf (9), middle shelf (7), top board (4), top
vertical front board (3), top middle vertical board (2) and top rear vertical board (1).
4. Insert 9 cam locks (B) into cam lock holes on lower shelf (9), middle shelf (7), top board (4), top vertical
front board (3), top middle vertical board (2) and top rear vertical board (1), then rotate clockwise to
secure cam bolts (A) in place.
STEP 10
STEP 11
E
E
E
11
12
12
12
12
